silicone medical id bracelets to buy 100 to send 100 is true,event wristbands vancouver
se, just a fashion jewelry. This kind of handband usually reflects the beliefs and values of the wearer.
First: Drawing design
Drawing design is generally based on the size of the sample provided by customers to draw production drawings, generally using graphic drawing software, such as CDR or AI software production, if customers can not provide samples, we can according to customer requirements, free to cooperate with customers to complete the design and production of drawings.
Second: Mould opening
Mould opening is that the master of the mould works out the offset plate according to the designed drawings, then uses the offset plate to engrave the copper worker, and finally uses the copper worker to engrave the steel mold. Some of the bracelet moulds are made in a relatively high technical content and a relatively long time; generally, the opening period is calculated according to five days. With the mold, production will be fast.
Third: color mixing
According to the color number mixing rubber on the international Pantone color card designated by the customer, our company matches the color, and the color difference is very small.
Fourth: Approval materials
Each bracelet is weighed electronically and weighs about 5.5 grams.
Fifth: Upper Mould Production
When the mould is ready, it will be manufactured on the machine. After installing the mould, the machine needs to be heated up. A machine with nine moulds can produce about 15,000 pieces per day.
Sixth: Quality Inspection
After the bracelet is manufactured, it is necessary to check the quality of the bracelet, which mainly depends on whether the bracelet conforms to the specifications. If it does not conform to the specifications, all the bracelets will be discarded.
Every bracelet will leave a residual edge when it is manufactured. After the quality inspection department has passed the inspection, the product will be sent to the later process department for trimming. (The average number of trims per person per day is about 3,000).
Eighth: Inspection of finished products
After trimming the edges, they are finished products. It is also necessary to send the finished product back to the product inspection department to check the trimming quality, whether there are substandard products, if any, it will be scrapped.
Ninth: Packaging Department
After the edge-repaired products have passed the inspection, they are packed according to the customer"s requirements. Packaging can be divided into two types: PP bag independent packaging and naked packaging. Both are 100 pieces a bag. Twenty packs and one box (2000 pieces) are usually the export standard boxes. Generally packing according to customer"s requirements.
Tenth: Inspection before sealing
After the packing is finished, the QC department will check the quantity. If there is no problem, it will seal the box and send it to the warehouse for delivery.
Silicone bracelet is made of 100% pure natural solid silicone rubber pressed by oil press, which has certain tension and softness, so it is easy to deform and recover immediately. Silicone bracelet has the characteristics of wear resistance, high temperature resistance, non-distortion, non-toxic, odorless, no side effects on human body, and is soft, non-cracking, long service life, non-irritating skin, etc. Silicone bracelet has the advantages of soft, non-cracking, non-irritating skin, etc. It"s a real green jewelry.
Some functional materials, such as negative ions, germanium, titanium and far infrared, are added to the raw materials of silica gel bracelets for processing, which has certain health functions and is popular all over the world. Additional logos of companies and enterprises are more prominent, closer to people"s lives, and have a good publicity effect.
How to custom bracelet for your own with a name bar? It is an easy way of simple 4 steps.
First, select your size. Length 8inch for adult, 7inch for youth and 6inch commonly for event wristbands vancouverkids. If you want the suitable size of you wrist, a new mould must be made to match it.
Second, choose your bracelet color and logo color. Variety of colors in the www.pantone-colours.com to match your favourite. The band can be swirl, segment or solid.
Third, choose the bracelet and logo style. It can be figured as you request. The logo can be printed, debossed or embossed with color or not.
Forth, printed the plain bar with special ink. The name bar will be printed with writable ink, you can write the name or message with a normal pen.
custom-photo-braceletcustom-mantra-bracelets lothing ,personalized ornament and so on .Since the birth of silicone wristband ,it occupies an increasingly important position in promotional products.More and more people like to wear silicone bracelets ,more and more people choose to customize silicone bracelets .We often see the people wearing silicone bracelets on their wrists in the street .However ,due to there are many styles of silicone bracelets .Each style of silicone bracelet is produced in a different production process .Do you know how to produce the embossed printed wristband ?
First step ,we need to make a digital proof depends on the customer requirements .The thickness of the line of the logo need to reach 0.3 mm at least .
Second step ,we will start the mass production when the customer confirm the digital proof .We need to prepare silica gel materials and produce the mold out .In the first step, we mentioned the thickness ofevent wristbands vancouver the line of the logo need to reach 0.3 mm at least .The reason is if the thickness of the line of the logo do not reach 0.3 mm ,the mold can’t be peoduce out .
Third step ,we will use the professional machine to produce the embossed wristband by the mold .And trim the edge of the embossed silicone wristband .
Last step ,we will printed the ink on the logo surface and dry it in an oven .
The above four steps are the production process of embossed printed wristband .