best mirrorless camera with viewfinder_silicone bracelets custom
We are professional rubber bracelet maker with years of experience.
Rubber bracelet is not only used as promotional gift, but also as a medical alert tool. Medical alert bracelets is commonly used. It is a high quality rubber bracelets with the ID printed on. We can print bar code, QR code or unique serial number together with some detail of the medical institute. Usually the wristband width need at least 15mm so that the code is clear enough to be scaned. We you scan the code with a phone, the detail of patient name, disease, taboo drugs, status will show up. It is a good help for doctor and patient to know the treatment. All the medical bracelets should made from 100% silicone which is harmless and eco friendly to avoid secondary injury to patients.
If the bracelet is embeded with a chip, it will note down the information of exercise, heart beat and sleeping. Then trafer it to the phone app. It contribute to health care.
lowing and individual pack. The most importantly it shows what the bracelet looks like with your message or logo. It is direct way to check if wording, colors of wristband and logo are correct. We are willing to make several mock-ups for your reference. The software for designing is CDR, so eps. or ai. file is appreciated for your logo. And there are variety of fonts for your choice. If the artwork get confirmed, we will proceed with it.
2nd Make the mould or film.
A mould is needed for debossed, embossed, colorfilled styles. We make a mould and set it in the machine, the high temperature of about 200℃ will solidify rubber into the sharp of wristband. A mould is made from copper.
A film is functioned like a mould but it is for printed wristband only. It transfer the ink to the surface of wristband as logo and wording.
3rd Prepare the rubber material.
A rubber wristband is mainly made from silicone rubber, and some other accessories like curing agent which solidify the soft rubber, and Color masterbatch which makes bracelet colored.
We will mix these material evenly in a blender. It comes out a ball of rubber. We need to measure it into blocks of almost same weight which as much as the weight of a wristband. Normal size of 202*12mm bracelet is weighted about 6g.
4th Produce wristband by the mould.
As we mentioned before in 2nd and 3rd step, we will transfer the blocks to wristband by a set of moulding machine of high temperature. When it cool down, it gets the characteristic of a wristband, smooth and strengthened.
5th Edge cutting.
A semi-product of rubber wristband has rough edges, we have to cut it off. The rough edge is cut by machine. It will be good.
6th Color the logo and wording
The wristband comes out from moulding machine without colors on the logo and lettering. We have to fill the ink or print the ink on the bracelet. Different style has different way of printing.
7th Clean the product
As the wristband has static electricity, dust will be on the surface and hard to move off. So we need to clean the wristband before packing. We usually wash it with watsilicone bracelets customer once.
After washing, we will check the quality.
8th Packing and delivery
We count the quantity by weighting. Normally packing will be 100pcs/bag, and 2500pcs/ctn. Individual packing is available. It is good to go now.
Silver is called the metal of the moon. It is a symbol of white brilliance. In some times, silver was more valuable than gold. Silver symbols are insight, inspiration, interstellar power and intuition. Silver is often used as a symbol of sacrifice in Western fantasy, and also represents mysterious significance. Silver is a calm color, representing nobility, dignity, purity and eternity.
When bracelet is of silver color, the logo and meassage looks good in white, black or purple. They are good conbination which most people choose.
The logo and message can be printed, colorfilled, embossed, debossed or embossed. You can refer to our category to see. We put variety of model of defferent styles, colors including special ones like glowing and UV transfer. Hope this will help you to make an order of custom bracelet of silver color.
Order less than 100pcs,silicone bracelets custom get 50pcs free and 5pcs keychains free. Order 100pcs or more, get 100pcs free and 10pcs keychains free. All the free wristbands and keychains are same design of the one you order.
wristband is that we make one mould for every design to make it debossed engraving. When it is extruded the silicone , the logo will be on the wristband. Finally we will fill it with the silicone based ink which is long lasting.
Debossed or embossed logo on the wristband makes it more understanding. It is the most popular wristband for the young. A mold is needed for debossed, embossed, colorfilled styles. We make a mold and set it in the machine, the high temperature of about 200℃ will solidify rubber into the sharp of bracelet. let"s see how the mould come into being.
Mold, industrial production to use injection, blow molding, extrusion, die-casting or forging and forming, smelting, stamping and other methods to get the various models and tools of the required products. In short, mold is used to make molding tools. This tool is made up of various parts, and different molds are made up of different parts. It mainly realizes the processing of the shape of the articles by changing the physical state of the formed material. It has the title of "the mother of industry".
Under the action of external force, the billet becomes a tool with specific shape and size. It is widely used in blanking, die forging, cold heading, extrusion, compaction of powder metallurgy parts, pressure casting, and plastic or injection molding of engineering plastics, rubber, ceramics and other products. The mold has a specific contour or inner cavity shape, and the shape of the cutting edge can be used to separate the blank from the contour line (blanking). The shape of the inner cavity can be used to obtain the corresponding three-dimensional shape of the blank. The mold generally consists of two parts, the movable die and the fixed die (or punch and concave die), and the two parts can be divided into two parts. When separate parts are removed, the blank is injected into the mold cavity to form. The mold is a precision tool with complex shape, bearing the bulging force of the billet. It has high requirements for the structure strength, stiffness, surface hardness, surface roughness and machining precision. The development level of die production is one of the important symbols of the mechanical manufacturing level.